

ROPE CUTTER Diam. 40
Rope cutter for 40 mm shaft
In the same category
Aquadrive
Stop B20 / CV21 for shaft Ø 40 to 50 mm
For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili
ATMB Marine
Phenolic brearing ring 30 x 44.45 x 120
Outer hydrolube ring in bonded elastomeric resin
ATMB Marine
Exhaust pipe Ø 50 x 61 mm
Special exhaust pipe. This hose is very flexible to facilitate mounting, the radius of curvature is 2.5 times in diameter. Hydrocarbon-resistant black SBR tube, synthetic pleats and embedded steel frame. Service temperature -30 to + 100 ° C. Operating pressure 3 bar
Eliche Radice
Sail Drive fixed aluminum three-blade propeller Ø 400 mm - 16 "
Aluminum Sail Drive SD3 three-bladed propellers. Propellers made with an aluminum / magnesium alloy, coated with epoxy paint. They have a rubber shock absorber hub. They are intended for sailboats, catamarans, displacement hulls
ATMB Marine
Rotating joints VRM / I 22 x 46
Ultraflex
Chrome-plated single lever console stand B103
Single lever unit for B103 putter for single engine. Delivered complete ready to install with screws and instructions
ATMB Marine
Stainless steel shaft Ø 45 length 2500 mm
ATMB Marine
PSS rotary joints shaft Ø 25 tube Ø 38-44-50-57 mm
PSS seals are high-end versions, they are 100% waterproof and of excellent reliability. PSS seals are also available for inch shafts and with bellows for different pipe diameters. Consult us
Eliche Radice
Fixed propeller 4 blades S Ø 480 mm - 19 "- (Pitch 16 to 27)
Polyflex
5 '' polyflex support - ZF 127x108x63.5
Polyflex
Polyflex support TD / ZF 121x98.5x63.5

Rope cutter for 40 mm shaft